Low-profile baler
M Series 655 Low-Profile Baler
-
Low-profile series
-
Cardboard and plastic
SKU : VBLOM-655
THE SOLUTION WHEN CEILING HEIGHT IS LIMITED.
Limited overhead clearance? No problem. Our dual-cylinder low-profile baler is specially designed for locations where every inch counts, without compromising compaction capacity.
With two cylinders positioned on either side of the baler, it delivers compaction power comparable to our standard single-cylinder configuration and can produce bales similar to those of a standard baler. Available in two heights, the low-profile series can pass through virtually any type of doorway, allowing installation where a conventional baler would be difficult—or even impossible—to fit.
Its ram is guided by heavy-duty ball bearings, ensuring smooth, stable movement throughout the compaction cycle.
Unlike models that require an upper cylinder to be extended, the low-profile configuration arrives ready for operation. Position it, plug it in, and it is ready to compact.
LESS HEIGHT. SAME POWER. SIMPLIFIED INSTALLATION.
The performance of a standard baler in a design made for tight spaces.
Motor 10 HP
-
Maximum Load Amperage
14 A
-
Pump Flow Rate
9 GPM
-
Operating Pressure
2100
-
Bale Ready Setting
1900
Cardboard Section – Single Cylinder
-
Hydraulic Cylinders
2 x 4 in
-
Cylinder Stroke
32 in
-
Compaction Force
52 750 lbs
-
Ram Pressure
36,6 PSI
-
Cycle Time
42 seconds
-
Bale Weight
up to 655 lbs
-
Bale Dimensions
48 x 30 x 36 in
-
Loading Opening
20,5 x 48 in
Documents
Motor 10 HP
-
Maximum Load Amperage
17 A
-
Pump Flow Rate
9 GPM
-
Operating Pressure
2100
-
Bale Ready Setting
1900
Cardboard Section – Single Cylinder
-
Hydraulic Cylinders
2 x 4 in
-
Cylinder Stroke
32 in
-
Compaction Force
52 750 lbs
-
Ram Pressure
36,6 PSI
-
Cycle Time
42 seconds
-
Bale Weight
up to 655 lbs
-
Bale Dimensions
48 x 30 x 36 in
-
Loading Opening
20,5 x 48 in
Documents
Motor 10 HP
-
Maximum Load Amperage
37 A
-
Pump Flow Rate
9 GPM
-
Operating Pressure
1900
-
Bale Ready Setting
1700
Cardboard Section – Single Cylinder
-
Hydraulic Cylinders
2 x 4 in
-
Cylinder Stroke
32 in
-
Compaction Force
47 750 lbs
-
Ram Pressure
33,16 PSI
-
Cycle Time
42 seconds
-
Bale Weight
up to 655 lbs
-
Bale Dimensions
48 x 30 x 36 in
-
Loading Opening
20,5 x 48 in
Documents
Motor 10 HP
-
Maximum Load Amperage
37 A
-
Pump Flow Rate
9 GPM
-
Operating Pressure
1900
-
Bale Ready Setting
1700
Cardboard Section – Single Cylinder
-
Hydraulic Cylinders
2 x 4 in
-
Cylinder Stroke
32 in
-
Compaction Force
47 750 lbs
-
Ram Pressure
33,16 PSI
-
Cycle Time
42 seconds
-
Bale Weight
up to 655 lbs
-
Bale Dimensions
48 x 30 x 36 in
-
Loading Opening
20,5 x 48 in
Documents
Motor 10 HP
-
Maximum Load Amperage
50 amperes
-
Pump Flow Rate
5 GPM
-
Operating Pressure
2100
-
Bale Ready Setting
1900
Cardboard Section – Single Cylinder
-
Hydraulic Cylinders
2 x 4 in
-
Cylinder Stroke
32 in
-
Compaction Force
52 750 lbs
-
Ram Pressure
36,6 PSI
-
Cycle Time
74 seconds
-
Bale Weight
up to 655 lbs
-
Bale Dimensions
48 x 30 x 36 in
-
Loading Opening
20,5 x 48 in
Documents
Overall Safety
Bullpen
Patented Bullpen helps secure the bale ejection area.
Bullguard
Patented Bullguard is designed to keep the operator at a safe distance during bale ejection.
Bullhorn
Also patented, Bullhorn is a device that holds the ram in the raised position in the event of a drop.
Securepak
The Securepak option provides an additional level of electrical control safety.
Baling Wire Threader
FASTER. SIMPLER. MORE PRODUCTIVE.
Simplify bale tying: baling wires can be inserted from the front of the baler and handled by a single operator.
Automatic Bale Ejector
AUTOMATE EJECTION. SIMPLIFY THE JOB.
Designed to simplify and safeguard bale ejection, the system activates automatically as soon as the ejection door is opened. No access to the rear of the baler or additional handling is required.
Cold-Weather Package
KEEP PERFORMING EVEN IN COLD WEATHER.
A combination of heating elements and hydraulic oil suited to low temperatures helps ensure baler operation in unheated spaces.
OUR DIFFERENCE. YOUR ADVANTAGE.
Exclusive features designed to make a difference.
- Included “Bale Ready” Indicator
See at a glance when the bale is ready. - Simplified Shipping
Certain models can be loaded directly into an enclosed trailer. - Easy Handling
Models can be moved using a pallet jack, without specialized lifting equipment. - Technical Information at Your Fingertips
A QR code on the control panel provides access to operating videos and electrical and hydraulic schematics. - Ball-Bearing Loading Door
Designed for easier opening and closing. - Automatic Door Opening
The loading door opens automatically at the end of the cycle to simplify operation. - Low-Noise Submerged Pump
Quiet design with a sound level of just 85 dB. - Hinged PowerPak
Provides easy access to components for service and maintenance. - Weld-Free Upgrades
Many options can be added or configured without welding, including safety devices, automatic ejection, and the wire guide. - Removable Moving Components
Moving parts can be removed as needed to make maintenance and repairs easier. - Interchangeable Parts Within Each Series
Components are interchangeable across different sizes in the same series, simplifying parts management and maintenance.
Get a Quote
We will review your request to ensure the selected equipment is the best fit for your needs. Two options are available: purchase or lease.
Request a Quote Lease Equipment
